Calypso CNC User Forums

Give an update here I did send the information requested and continued to trouble shoot on my own and may have found a issue and that's the the debounce setting in the smooth stepper was set to 0 (disabled) I set it to 1us (could be ms) and it does now appear to work. if you agree this was most like...

That is correct 1. Yes, If I run a wire from gnd to the touch plate the probe led does go on. 2. Yes. the probe led also goes on when I touch the spindle nose to ground. 3. Yes, with a 0.25" end mill bit in the router and I touch from the TP to the Bit the Led does come on And this is what conf...

At this point it is a One Signal wired to the Probe Input on Mach Ports and Pins have Probe Enabled, Pins are 2 2, Active Low
I am using a Ethernet Smooth Stepper and a CNC4PC BOB which has the touch plate pulled high (i'd have to get which one as I don't recall off hand if you needed to know)

Hi I am running MSM on a KRMx02 CNC Router. I've added a TP and configured ports and pin and when it is touched I get a PROBE event according to the hardware page. on the settings page I have the TCP TP Installed selected. on the tooling page I have set TC Auto TCP TC Auto TLO Master Tool Back on th...

I have to completely reinstall Mach3 and MSM and when I go to activate MSM it fails with Shell Error 438: Object doesn't support the property or method How can i get MSM reactivated? This is the pro version. I also just renewed my license thinking that was the issue. didnt help by the the old PC is ...