Calypso CNC User Forums

Hi Dave,

Sent the guys for the UC300 a message will wait to see what happens,

PM sent

Rob T

Hi Dave, I have the full OneCNC suite from my employer however as I have to train myself I just couldn't make inroads into the basic stuff like I could with Solidworks, plus if I leave my employer I loose the licence so needed something for ever so to speak. I tried a hooky copy of HSM works and it ...

Hi Dave, A great day today after some testing to confirm that even a G4 P0.1 dwell sorts out the problem, two minutes editing my part programmes today and a full days production with not one error :D :D :D :D I am using Solidworks 2013 with HSM express, I have demoed quite a few packages and this on...

Hi Dave, I tried a G4 P3.0 yesterday in the part programme straight after the M6 and the problem did indeed go away also M0 or M1 seemed to cure it however MAch3 was also ignoring this line so the dwell would not work or the op stop or stop commands but the M6 did complete correctly yippee.. I agree...

Hi Dave, Lots more testing, taking your comment about a timing issue I have tried to adjust the look ahead down to 1 line then 0 lines no improvement now back to 20, deleted all the tool tables and started again, no improvement. So I thought for safety and to get something to work I would try puttin...

OK, very bad Day today lots and lots of annoying errors which are hard to pinpoint a few Cyprus errors which only stay on the screen for a short time so can't copy them but all required a reboot and required set up to continue. Rant over I still much prefer the power of MSM. Now I have tried lots of...

Hi Dave, I have mach3 running on this pc/nettop; Running with Windows 8. Acer Revo RL80 Nettop PC, Intel Celeron 1007 1.5GHz, 2GB RAM, 500GB HDD, NOOPT, Intel HD, Wifi, Also the U300 claims to ease the load on the processor see below, so far it has been excellent and very easy to work with. I will t...

Hi, Attached are two files the error log and the programme being run. Sequence was as follows, Power up Reference Load T99 M6 (spindle probe master tool) in MDI Probe table touch probe. (g54 part offset set earlier) load programme run programme in single block M6 tool call loads t3 and measures corr...

Hi Dave, Guess I should have been posting this whilst at home so I could have been a bit more accurate with the description but will be back on Sat so can fill in all the gaps then. 1. MSM v 2.0.10 2.R 3.043.066 3. UC 300 To finish off the programme my post processor sends all axis to machine co-ord...

Hi Dave, I am experiencing an issue with my MSM Pro when running a tool change routine using M6 Txx, I am using master tool mode with my probe set up as master tool (99). I call T99 M6 manually and probe the tool change table plate (calibrate) then probe the feature on my workpiece to give my G54 al...