Sun - 11:19:26 ---Program Startup
Sun - 11:19:54 ---MachStdMill Initialized
Sun - 11:21:00 ---Tool Change...Press CycleStart to continue. 
Sun - 11:21:00 ---Moving To TC Position...
Sun - 11:21:08 ---Press CycleStart after Tool Change
Sun - 11:21:12 ---Moving To TC Position...
Sun - 11:21:13 ---
Sun - 11:21:14 ---Probing to TCP TP along Z-...
Sun - 11:21:30 ---TCP Touch Plate Found...
Sun - 11:21:32 ---MasterTool measured, MT PTL stored, TLO = 0
Sun - 11:21:32 ---TLO Measured.
Sun - 11:21:37 ---Auto TLO complete.
Sun - 11:21:37 ---Tool Change Complete.
Sun - 11:22:25 ---Tool Change Complete.
Sun - 11:22:37 ---T3  D=2.2 CR=0. TAPER=118DEG - ZMIN=3. - DRILL
Sun - 11:22:37 ---DRILL3
Sun - 11:22:42 ---DRILL3
Sun - 11:22:47 ---DRILL3
Sun - 11:22:51 ---TOOL CHANGE TEST
Sun - 11:22:52 ---T3  D=2.2 CR=0. TAPER=118DEG - ZMIN=3. - DRILL
Sun - 11:23:13 ---DRILL3
Sun - 11:23:15 ---Tool Change...Press CycleStart to continue. 
Sun - 11:23:16 ---Moving To TC Position...
Sun - 11:23:18 ---Press CycleStart after Tool Change
Sun - 11:23:22 ---Moving To TC Position...
Sun - 11:23:23 ---
Sun - 11:23:24 ---Probe T# not mounted
Sun - 11:23:24 ---Probing to TCP TP along Z-...
Sun - 11:23:45 ---TCP Touch Plate Found...
Sun - 11:23:47 ---Tool # 3 measured; TLO = -35.102069
Sun - 11:23:47 ---TLO Measured.
Sun - 11:23:54 ---Auto TLO complete.
Sun - 11:23:54 ---Tool Change Complete.
Sun - 11:24:55 ---T3  D=2.2 CR=0. TAPER=118DEG - ZMIN=3. - DRILL
Sun - 11:24:55 ---DRILL3
Sun - 11:24:55 ---Tool Change...Press CycleStart to continue. 
Sun - 11:24:56 ---Moving To TC Position...
Sun - 11:24:58 ---Press CycleStart after Tool Change
Sun - 11:25:03 ---Scripter Compile Error. In:M6End.m1s